Industry
Mission critical, always on.
Every feed, one wall.
24/7 video walls for SCADA, NOC, surveillance and command-and-control centres that can never go dark.
Engineered for 24/7 control rooms.
Walls that never go dark, 24/7, hot-swap, redundant.
Dozens of feeds, one view
Video-wall processors window SCADA, CCTV and dashboards freely across the canvas with preset layouts.
Operator fatigue over long shifts
Flicker-free 7680Hz refresh, low blue-light calibration and matte surfaces reduce eye strain across 12-hour shifts.
Failure is not an option
Redundant PSUs, dual signal paths and hot-swappable modules deliver 99.99% wall availability.
Products for this sector
All panels are 24/7-rated direct-view LED with redundant power, hot-swap modules and front service access.
KAN Wall Processor X8
Installed & running
Real installations across India, from utility SCADA rooms to smart-city command centres.
Compare product tiers
| Spec | Standard P1.8 | ControlPro P1.5 | Elite P1.2 |
|---|---|---|---|
| Pixel pitch | 1.8 mm | 1.5 mm | 1.2 mm |
| Brightness | 800 nits | 1000 nits | 1200 nits |
| Refresh rate | 3840 Hz | 3840 Hz | 7680 Hz |
| Duty cycle | 24/7 | 24/7 | 24/7 |
| Redundancy | PSU only | PSU + signal | Full dual-path |
| Warranty | 3 years | 5 years | 5 years + AMC |
| Certifications | CE, RoHS | CE, RoHS, FCC | CE, RoHS, FCC, BIS |
From site visit to switch-on
Site survey to switch-on, no surprises on cut-over.
Site survey
Console sight lines, ambient light, HVAC load and redundancy requirements.
Design & spec
Wall geometry, processor architecture, source mapping and failover design.
Installation
Parallel-run commissioning with zero interruption to live operations.
AMC support
24/7 remote monitoring, on-site spares and guaranteed restore SLAs.
Our grid control wall runs 24/7 and has done so for three years on Kan Universal hardware. When we migrated from the old cube wall, they ran both systems in parallel for two weeks, operators switched over without losing a single shift. Module swaps happen live, mid-shift, with zero downtime.
Common questions
Direct-view LED has no bezels interrupting feeds, no backlight burn-in on static SCADA mimics, and modules hot-swap from the front without taking the wall down.